Whether extruded or hand cast in our wide range of alloys
and configurations, each of our anodes go through the same process to
produce a fine grain structure essential for even plate-out and maximum
throwing.
Sample Picture
Configuration Name
Dimensions
Metal
ROUND
1/8" - 4"
Dia
Various Lengths
Tin
Lead
Tin/Lead Alloys
SQUARE
1/8" x
1/8" - 3" x 3"
Various Lengths
Tin
Lead
Tin/Lead Alloys
RECTANGLE
1/8" - 3"
Max. Width = 5"
Various Lengths
Tin
Lead
Tin/Lead Alloys
"D" STYLE
2" x 3"
Various Lengths
Tin
Tin/Lead Alloys
OVAL
2" x 3"
Various Lengths
Tin
Tin/Lead Alloys
ELLIPTICAL
2" x 3"
Various Lengths
Tin
Tin/Lead Alloys
ROSETTE
1-1/2" &
2" OD
Various Lengths
Tin
Lead
Tin/Lead Alloys
12 POINT
3" OD
Various Lengths
Tin
Tin/Lead Alloys
16 POINT
3" OD
Various Lengths
Tin
Tin/Lead Alloys
SAWTOOTH
1-1/4" x
4"
Various Lengths
Lead
Tin/Lead Alloys
ZIG ZAG
3/16" x 3"
with 7/16" Centre
Various Lengths
Lead
Tin/Lead Alloys
RIBBED
3/4" x 3"
Various Lengths
Lead
Tin/Lead Alloys
We also produce Lead anodes with cores such as
copper, mild steel to name a few.
All our Lead Alloyed Anodes are available with
either Cast Bronze or Copper Hooks, which are cast into nobbins and
lead burned onto the anode stock. (All nobbin & burning bar used
in homogenous bonding are of the same alloy as the anode stock).
Tin & Tin/Lead (Solder) Anodes are supplied
drilled with a 3/8" Diameter hole and tapped (16 thread) to
1-1/4" Deep.
